Maintenance; General Maintenance - Ryobi P1832 Manuel D'utilisation

DRIVING/REMOVING SCREWS
See Figures 5 - 6, page 11.
WARNING:
Do not drive a screw where there is likely to be hidden
wiring behind the surface. Contact with a "live" wire will
make exposed metal parts of the tool "live" and possibly
shock the operator. If you must drive a screw where
hidden wire may be present, always hold tool by insulated
gripping surfaces (handle) when performing the operation
to prevent a shock to the operator.
WARNING:
When servicing, use only identical replacement parts.
Use of any other part could create a hazard or cause
product damage.
NOTE: ILLUSTRATIONS BEGIN ON PAGE 10 FOLLOWING FRENCH AND
OPERATION
P235 IMPACT DRIVER

MAINTENANCE

SPANISH LANGUAGE SECTIONS.
8 — English
CAUTION:
The impact driver is not designed to be used as a drill.
 Place the direction of rotation selector in the correct posi-
tion for the operation.
 Hold the impact driver with one hand.
 Place the bit on the screw head and slowly depress the
switch trigger. Start the bit slowly for more control.
 As screw is driven, impacting will begin.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and can be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.