Symbols; Features - Ryobi P1832 Manuel D'utilisation

The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions
Alert
Hot Surface
Recycle Symbols
V Volts
min Minutes
Direct Current
n o
No Load Speed
.../min Per Minute
PRODUCT SPECIFICATIONS (P277 Drill-driver)
Chuck .......................................................... 1/2 in., Keyless
No Load Speed ................................ Low 0-440/min (RPM)
Clutch ...............................................................24 positions
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not related to an
injury hazard, such as a situation that may result in property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand operator's manual
before using this product.
Always wear eye protection with side shields marked to comply with ANSI
Z87.1.
Do not expose to rain or use in damp locations.
To reduce the risk of injury or damage, avoid contact with any hot surface.
This product uses nickel- cadmium (Ni-Cd) and lithium-ion (Li-ion) batteries.
Local, state or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding available
recycling and/or disposal options.
Voltage
Time
ASSEMBLY
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute

FEATURES

High 0-1,600/min (RPM)

SYMBOLS

DESIGNATION/EXPLANATION
PRODUCT SPECIFICATIONS (P235 Impact Driver)
Coupler ...................................................................... 1/4 in.
No Load Speed .................................... 0-2,600/min. (RPM)
Torque ............................................................... 1,600 in.lbs.
Impacts Per Minute ............................................. 3,200 IPM
4 — English