Grizzly GHS 2842 B Traduction De La Notice D'utilisation Originale page 78

GB
Preparation:
• Never use the shredder with
other persons or animals nearby.
• Wear hearing and eye protec-
tion at all times when using the
shredder.
• Wear appropriate protective
clothing such as protective
gloves, firm footwear and long
trousers. Do not wear loosely
fitting clothes or clothes with
dangling cords or belts.
• Only use the shredder in the
open (that is, away from walls
or other rigid structures) on a
firm, level surface.
• Do not use the machine on a
paved, gravelled area, which
could be damaged by ejected
material.
• Before you start up the shredder,
check that all of the nuts, bolts
and other fastenings are tight.
Covers and shields must be
fastened properly and in good
working order. Replace any
damaged or illegible stickers.
• Only use replacement parts
and accessories supplied and
recommended by the manu-
facturer. Using third-party parts
will immediately invalidate the
guarantee.
• Do not leave the shredder
working unattended and keep it
in a dry place out of children's
reach.
• Only connect the shredder to a
properly earthed mains power
supply. Make sure that the ex-
tension cable and socket are
properly earthed.
• Connect the appliance to a
power socket with a residual
current circuit
78
breaker.
Working with the device:
• Make sure that the funnel feed-
er is empty before you start the
shredder.
• Keep your head, hair and body
away from the intake opening.
• Do not reach into the funnel
feeder during operation. The
shredder will continue to run for a
short period after you switch it off.
• Always make sure you are
standing in a firm, balanced po-
sition. Do not lean forwards, and
never stand above the shred-
der when inserting materials.
• Make sure that the material
inserted into the shredder does
not contain hard objects made
of metal, stone, glass or similar.
• Do not use the shredder in the
rain and in bad weather. Work
in daylight or under good light-
ing conditions.
• Do not operate the shredder
when you are tired or distract-
ed, or under the influence of
alcohol or medication. Always
take a break when you need
one and be sensible about how
you work.
• Switch the shredder off and
pull the plug under the follow-
ing circumstances:
- when you are not using the
device,
- transporting it or leaving it
unattended;
- before releasing a jammed
blade.
- when you are checking the
device, cleaning it or remov-
ing blockages;
- when you are carrying out
cleaning or maintenance work
or replacing accessories;