Locking The Hand Control Setting; Start/Stop/Reverse Function - Kinetec Spectra Manuel D'utilisation

The hand control allows the patient to control the machine as appropriate.
Simultaneously press the
The display reads "LOCK", you can not change the parameters, if you try the display reads "LOCK".
To unlock the hand control, simultaneously press the
Comment: The hand control is unlocked when you switch the unit ON/OFF.
As with all KINETEC systems, KINETEC Spectra is equipped with a START/STOP/REVERSE function.
When the unit is running, the display reads RUN
Press the
Press the
For optimum safety, always give the hand control to the patient before starting the system.
and keys to lock the hand control,
We recommend that you lock the hand control when you give it to the patient.
key of the hand control. The movement stops. The display reads STOP.
key of the hand control. The movement starts in the opposite direction and the display reads RUN.
and keys, The display reads "UNLOCK".
Caution:
Use of the hand control

Locking the hand control setting

START/STOP/REVERSE function

7
GB