Mounting And Operation - Bosch GCC 30-4 Professional Notice Originale

OBJ_BUCH-2515-003.book Page 26 Tuesday, April 25, 2017 8:11 AM
26 | English
Two-part adhesive
Properties
Chemical basis
Suitable materials
Unsuitable materials
C)
Pot life (at 20 °C)
Setting time
Strength properties
Mixing ratio
Optimal application temper-
ature
C) Definition of "pot life": Time until the product can no longer be applied once its parts have been
thoroughly mixed.
Declaration of Conformity
Robert Bosch Power Tools GmbH hereby declares that the GCC 30–4 Professional
radio communication unit complies with Directive 2014/53/EU.
The full EU declaration of conformity is available at: http://eu-doc.bosch.com/

Mounting and Operation

Registering and setting up the app/web-based application
(see figures A1 – A2)
Before you can use the GCC 30–4 Professional, you need to register with
TrackMyTools online.
– Open the website www.bosch-trackmytools.com and register.
After registration is complete, you will receive your access information.
Bosch offers a special application (app) and a web-based application for managing
the inserted GCC 30–4 Professional module and determining its location.
1 609 92A 3W4 | (25.4.17)
UHU PLUSMULTIFEST
– Shear strength, shock resistance and peeling resist-
ance
– Temperature resistance
– Not susceptible to sagging
– Fills cracks and splits up to 4 mm
– Weather-resistant and moisture-resistant
– No surface treatment necessary
Methyl methacrylate
Plastics, metals and composite material parts
Polyethylene, polypropylene
4–6 min
10–15 min
75% of maximum adhesion after 10–15 minutes at
room temperature, full hardening after 24 hours
1:1
+ 20 °C ... +22 °C
Bosch Power Tools