Operation; Manually Setting Lifting Heights; Storing And Moving To Lifting Heights - Bosch rexroth 3842 559 921 Instructions De Service

20/30

Operation

9 Operation
Collision with objects and obstacles
Lifting modules and their applications can be damaged.
Keep the movement area clear.
„
Install collision protection.
„
9.1

Manually setting lifting heights

Fig. 9: Button description / Manually setting the stroke
A:
Display (translucent, activated by the
push of a button)
1-4:
Stroke storage locations
The lifting module is extracted and retracted at normal velocity as long as the
or button is pressed.
– Retracts the lifting module and stops it 25 mm before the end position
(safety area).
Release the
„
The lifting module continues running at reduced velocity and is stopped when
the button is released or in the retracted end position.
9.2

Storing and moving to lifting heights

Button / display
Assigning memory buttons
or
Button [1], [2],
[3] or [4]
Bosch Rexroth AG, MPS: Control unit, 3 842 559 935/2019-08
button and press it again.
Instructions
Move table to desired height
Push shortly four times in a row to store the set height to the
corresponding button.
NOTICE
A
Extension
Retraction
559 935-09