Contents
1 Key to symbols and safety instructions . . . . . . . . . . 83
1.1 Key to symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
1.2 General safety instructions . . . . . . . . . . . . . . . . . 83
2 Product details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
2.1 Importance usage notices . . . . . . . . . . . . . . . . . . 85
2.2 Standard delivery . . . . . . . . . . . . . . . . . . . . . . . . . 85
2.3 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
2.4 Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . 86
2.5 Supplementary accessories . . . . . . . . . . . . . . . . . 86
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
3.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
3.2 Electrical connection . . . . . . . . . . . . . . . . . . . . . . 87
3.2.1Connecting the BUS connection and
temperature sensor (extra-low voltage side) . . . .87
3.2.2Connecting the power supply, pump and
mixing valve (mains voltage side) . . . . . . . . . . . . .87
3.2.3Connection diagrams with system examples . . . 88
4 Commissioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
4.1 Setting the code switch . . . . . . . . . . . . . . . . . . . . 89
4.2 System and module commissioning . . . . . . . . . . 89
4.2.1Settings for heating circuit . . . . . . . . . . . . . . . . . . 89
4.2.2Settings for cylinder primary circuit . . . . . . . . . . 89
5 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
6 Environment / disposal . . . . . . . . . . . . . . . . . . . . . . . . 90
MM100
All manuals and user guides at all-guides.com
1
Key to symbols and safety instructions
1.1
Key to symbols
Warnings
Warnings in this document are identified by a
warning triangle printed against a grey
background.
Keywords at the start of a warning indicate the
type and seriousness of the ensuing risk if
measures to prevent the risk are not taken.
The following keywords are defined and can be used in this
document:
•
NOTICE indicates a situation that could result in damage to
property or equipment.
CAUTION indicates a situation that could result in minor to
•
medium injury.
•
WARNING indicates a situation that could result in severe
injury or death.
•
DANGER indicates a situation that will result in severe
injury or death.
Important information
This symbol indicates important information
where there is no risk to people or property.
Additional symbols
Symbol
Explanation
▶
Step in an action sequence
Cross-reference to another part of the document
•
List entry
–
List entry (second level)
Table 1
1.2
General safety instructions
These installation instructions are intended for a competent
person.
▶ Read the installation instructions (heat appliances,
modules, etc.) before installation.
▶ Observe safety instructions and warnings.
▶ Observe national and regional regulations, technical rules
and guidelines.
▶ Keep a record of any work carried out.
Contents | 83
6 720 808 907 (2014/04)