Electrical - LawnMaster HT2201 Mode D'emploi

ELECTRICAL

WARNING
TO AVOID ELECTRICAL +$=$5'6 FIRE +$=$5'6 OR DAMAGE TO THE TOOL, USE
PROPER CIRCUIT PROTECTION. YOUR HEDGE TRIMMER IS WIRED AT THE FACTORY
FOR 120V OPERATION. CONNECT TO A 120V, 15A CIRCUIT AND USE A 15A TIME-
DELAYED FUSE OR CIRCUIT BREAKER. TO AVOID SHOCK OR FIRE IF THE POWER CORD
IS WORN, CUT OR DAMAGED IN ANY WAY, REPLACE
DOUBLE INSULATED (See Figure 1.)
This hedge trimmer has a plug that looks like the one shown in Fig. 1. The hedge trimmer is
double insulated to provide a double thickness of insulation between you and the tool's electrical
system. All exposed metal parts are isolated from the internal metal motor components with
protective insulation.
1) 2-prong plug
2) Properly grounded extension cord
WARNING
USE ONLY IDENTICAL REPLACEMENT PARTS WHEN SERVICING THE HEDGE TRIMMER,
TO AVOID INJURY.
WARNING
DOUBLE INSULATION DOES NOT TAKE THE PLACE OF NORMAL SAFETY PRECAUTIONS
WHEN OPERATING THIS TOOL.
WARNING
TO AVOID ELECTRIC SHOCK:
Use only identical replacement parts when servicing a tool with double insulation.
IT IMMEDIATELY.
Fig. 1
8