Specifications - Sony HT-K25 Mode D'emploi

Specifications

Amplifier/subwoofer section
POWER OUTPUT
Rated Power Output at Stereo mode
(6 ohms 1 kHz, THD 0.7 %)
Reference Power Output
(THD 0.7 %)
* Depending on the sound field settings and the
source, there may be no sound output.
Frequency response
Inputs (Digital)
AUX (Coaxial)
DVD, SAT (Optical)
Inputs (Analog)
TV, VIDEO
Enclosure type
Speaker unit
Rated frequency range
High frequency cut-off frequency
GB
30
40 W + 40 W
Front*: 40 W/ch
Center*: 40 W
Surround*: 40 W/ch
(6 ohms)
Subwoofer: 70 W
(3 ohms)
20 Hz – 20 kHz
Impedance: 75 ohms
S/N: 90 dB
(A, 20 kHz LPF)
S/N: 90 dB
(A, 20 kHz LPF)
Sensitivity: 700 mV
Impedance: 50 kohms
S/N: 84 dB
(A, 20 kHz LPF)
Advanced S.A.W.
magnetically shielded
16 cm cone type
30 Hz – 200 Hz
150 Hz
General
Power requirements
Area code Power requirements
CEL, CEK, SP 220–230 V AC, 50/60 Hz
MX 120 V AC, 60 Hz
Power consumption
Power consumption (during standby mode)
Dimensions (w/h/d)
Control center
Subwoofer
Mass (Approx.)
Control center
Subwoofer
Satellite speaker section
Front, center and surround speakers
SS-K25
Speaker system
Speaker units
Enclosure type
Rated impedance
Sensitivity level
Frequency range
Dimensions (w/h/d)
Mass
Design and specifications are subject to change
without notice.
68 W
0.8 W
196 × 60 × 269 mm
including projecting parts
and controls
224 × 318.5 × 344 mm
including front panel
1.1 kg
7.1 kg
Full range, magnetically
shielded
5.7 cm cone type
Bass reflex
6 ohms
85 dB (1 W, 1m)
130 Hz – 20,000 Hz
Approx. 77 × 115 × 89 mm
including front grille
Approx. 0.5 kg