Alarm And Functions Menu; Settings Menu - Navimo Lofrans Galaxy503 Manuel D'installation Et D'utilisation

5 MENU

5.4 Alarm and functions menu

Alarms & Functi
U p A l a r m
A u t o D o w n
L o a d D e f a u l t
E x i t
Use the (DOWN) or (UP) key to move around the parameters.
Up Alarm
It is possible to enable the function and establish
the height at which the anchor-winch stops; after
which it is only possible to give pulsed
commands.
Settable values: 1.0 - 1.5 - 2.0...5.0 (metres or
feet).
Auto Down
Enables the automatic anchor lowering procedure,
at the desired height, with the pressing (for at least
3 seconds) of the keys and .
Settable value: 5 - 10 - 15...40 (metres or feet).
Load Default
This function allows the User to revert to the
original factory default settings, thus erasing all
settings memorised.
This command must only be used in the event
of programming errors.
Exit
To return to the settings menu.
3 . 0
O f f
N o
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= Yes = No
Confirm with
Confirm with

5.5 Settings menu

Settings
C o n t r a s t
L i g h t
B k L i g h t T i m e
K e y b . B e e p
E x i t
Use the (DOWN) or (UP) key to move around the parameters.
Contrast
By enabling this function it is possible to start
the display contrast programming procedure.
Light
By enabling this function it is possible to start
the display luminous intensity programming
procedure.
BackLight Time
This function allows the user to set the
backlight on time during which the display
remains lit after the last command given
(default value 30 seconds).
Keyboard Beep
This function allows the user to enable or
disable the buzzer (emitted each time a key
is pressed).
Exit
To return to the settings menu.
Contametri mod. Galaxy 503/703
3 0
Ye s
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
Select value with
Confirm with
Select with
= No = Yes
Confirm with
Confirm with
20