Adjusting The Shock Absorbers - Reely ROAD Leopard Notice D'emploi

c) Adjusting the Shock Absorbers
A
The shock absorbers at the vehicle's front and rear vehicle axles can be mounted in different positions at the lower
transverse link (A) and at the damper bridge (B).
The spring-pre-tension at the upper end of the shock absorber (C) can be adjusted by turning a knurled screw.
Always set the shock absorbers for one axle evenly (at the left and right wheels of the front or rear axle). Otherwise,
driving behaviour will be influenced negatively.
Optional accessories (not included in the delivery; can be ordered separately) that can be used include
springs with a different stiffness or damper oil of a different viscosity for filling the shock absorbers.
C
Front axle
C
B
B
A
Rear axle
45