Reely ROAD Leopard Notice D'emploi page 42

Setting Rear Axle Camber:
For setting the camber, turn the screw (A) of
the upper transverse link.
Because this screw has a left and right hand
thread at either end, the transverse link does
not need to be dismantled for the camber to be
adjusted
A
In the axle spur there are several more sus-
pension points (B) for the upper transverse link.
When the wheel rebounds, the camber
changes depending on the installation position
(e.g. stronger camber when the wheel is
pushed in).
B
42