Selecting The Setup Level; Selecting The On-Screen Language; Adjusting The Sc/H (Subcarrier To Horizontal); Rack Mounting - Sony DSC-1024G Mode D'emploi

Selecting the setup
level
You can select the black level (setup level) for the output NTSC
signal.
The black level is set to "0"(IRE) at the factory. If the output
picture is too dark, change the setting to "7.5"(IRE).
1 Press the MENU button twice.
The MENU 2 screen appears.
MENU
2 Press the CENT ◊/√ button to move the cursor (z) to
SETUP NTSC, and press the ENTER button.
The SETUP NTSC menu appears.
ENTER
CENT
3 Press the CENT ◊/√ button to select "7.5" or "0," and
press the ENTER button.
4 To quit the menu, press the MENU button twice.
Selecting the
on-screen language
You can select the on-screen language among five languages.
1 Press the MENU button once.
The MENU 1 screen appears.
2 Press the CENT ◊/√ button to move the cursor (z) to
LANGUAGE and press the ENTER button.
The LANGUAGE menu appears.
3 Press the CENT ◊/√ button repeatedly to move the
cursor (z) to the desired language, and press the ENTER
button.
4 To quit the menu, press the MENU button three times.
44
MENU 2
zSETUP NTSC
GEN LOCK
SC/H ADJ
USE: ENTER EXIT:MENU
SETUP NTSC
z7.5
0
USE: ENTER CANCEL:MENU
LANGUAGE
zENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAN ˜ OL
USE: ENTER CANCEL:MENU
Adjusting the SC/H
(Subcarrier to Horizontal)
When you edit or record a composite output signal with a
VCR, you need to adjust the subcarrier-to-horizontal phase
(SC/H).
Prepare special measurement equipment for the adjustment.
1 Press the MENU button twice
The MENU 2 screen appears.
2 Press the CENT ◊/√ button to move the cursor (z) to
SC/H ADJ and press the ENTER button.
The adjustment value is displayed on the screen.
3 Press the CENT ◊/√ button to adjust the SC/H.
4 To quit the menu, press the MENU button twice.

Rack mounting

You can mount the unit on a 19-inch EIA standard rack using
the optional MB-510 mounting bracket kit.
1 Attach the handle brackets with the four large screws
included in the kit.
Large screws
Handle bracket
2 Remove the four legs from the bottom of the unit.
3 Mount the unit into a 19-inch standard rack.
Caution
Do not hold the handle brackets to carry the unit. If you do,
the unit may separate from the handle brackets.
0
SC/H
Handle bracket
Large screws