Attaching An Interface Card; Connecting The Ac Adapter - Sony BRU-SF10 Mode D'emploi

Attaching an Interface
Card
Attach an interface card such as BRBK-HSD2 to the
card slot on the rear of this unit.
1
Loosen the two screws to remove the card slot
cover.
2
Insert an optional interface card into the card slot.
Align both ends of the interface card with the
sliders inside the slot, then insert the card securely
as far as it will go.
Interface card (not supplied)
3
Tighten the two screws on the interface card.
To remove the interface card
Loosen the two screws on the interface card and pull the
card out straight and slowly.
8
GB
Attaching an Interface Card / Connecting the AC Adapter
Connecting the AC
Adapter
1
Remove the DC-cord secure connection screw on
the rear of the unit.
DC-cord secure connection screw (+M3 × 6)
2
Connect the supplied AC adapter and the power
cord.