Remote Sensor - Sony DSC-1024G Mode D'emploi

Location and function of parts and controls (continued)
S
ON/OFF
@¡ @º !ª

8 Remote sensor

Receives the beam from the remote commander.
9 CHROMA +/– button
Press to adjust the picture chroma level.
!º PHASE +/– button
Press to adjust the picture phase level.
!¡ CONTRAST +/– button
Press to adjust the picture contrast.
!™ OVERFLOW indicator
This indicator lights when input signal level is excessive.
!£ APERTURE button and indicator
Press this button to turn on the indicator to make the
picture sharper. Press it again to turn off the indicator for a
softer picture.
!¢ STILL button and indicator
Press this button to turn on the indicator to get a still
picture. Press it again to turn off the indicator to resume
the normal screen.
!∞ OPEN button
Press to open the front cover.
!§ INPUT SELECT buttons
Press to select the input signal.
1: to select the input source connected to the VIDEO 1 (Y/
C or COMP) connector and the AUDIO 1 IN connector.
2: to select the input source connected to the VIDEO 2 (Y/
C or COMP) connector and the AUDIO 2 IN connector.
3: to select the input source connected to the VIDEO 3
(RGB or YBR*) connector and the AUDIO 3 IN
connector.
* YBR is an abbreviation of Y/B-Y/R-Y component signal.
30
TV
IN NTSC PAL
PJ
OFF
DISPLAY TEST LINE OUTPUT OUT NTSC PAL
COMMAND
MODE ON/OFF PATTERN DOUBLER FORMAT GEN-LOCK
MENU
CENT
ENTER
!™!£!¢
8 90 !¡
OVER FLOW
SIGNAL FORMAT
31.5k 37k 48k 64k OTHERS
31.5k 37k 48k 64k APERTURE
PHASE
CHROMA CONTRAST
SIZE
!•
!¶ ZOOM +/– buttons
Press the + button to zoom up, and the – button to zoom
down.
!• SIZE V/H +/– buttons
Press to adjust the size of the picture.
V +: to expand the vertical size
V–: to reduce the vertical size
H+: to expand the horizontal size
H–: to reduce the horizontal size
!ª CENT◊/√/ı/∫ buttons/cursor buttons
Press to shift the picture in the direction of the arrow.
The ◊ and √ buttons are also used for moving the cursor on
the menu screen.
@º MENU button
Press to make the menu appear, or quit the menu.
@¡ ENTER button
Press to select the desired item in a menu.
!∞ !§
OPEN SCAN CONVERTER DSC-1024G
INPUT SELECT
STILL
1 2 3
ZOOM
!¶