Adjusting The Recording Level - Sony MDS-JB940 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

• If "LPstamp:On" is set, "LP:" is recorded as part of the track
name, so the number of characters that can be input in a single
MD is reduced. Furthermore, "LP:" is automatically copied if
the track name is copied or if the track is divided by using the
Divide function.
• MDs recorded in MD LP (LP2 or LP4 Stereo) mode should be
played back on a deck that supports MD LP mode. These MDs
cannot be played back on other decks.
• Even if you press REC MODE during recording or recording
pause, you cannot change the recording mode.
• Even if you press REC MODE repeatedly to select MONO,
the monitor signal during recording does not become
monaural.
Adjusting the recording
level
You can adjust the recording level for both analog and
digital recordings.
DISPLAY/CHAR
1
Do steps 1 to 6 of "Recording to an MD" on
page 14.
2
Play the portion of the program source with the
strongest output.
3
Press DISPLAY/CHAR (or DISPLAY) repeatedly
until the level of the input signal appears.
4
While monitoring the sound, turn REC LEVEL (or
press REC LEVEL/ANALOG OUT LEVEL +/–
repeatedly) to raise the recording level to its
highest level without turning on the two rightmost
indicators on the peak level meters.
Avoid turning on these indicators
5
Stop playing the program source.
6
To start recording, continue from step 8 of
"Recording to an MD" on page 14.
z
You can use the Peak Hold Function
The function freezes the peak level meters at the highest level
reached by the input signal.
1 While the deck is stopped or playing, press MENU/NO twice.
"Setup Menu" appears in the display.
2 Turn AMS (or press ./> repeatedly) until "P.Hold Off"
(factory setting) appears, then press AMS or YES.
3 Turn AMS (or press ./> repeatedly) to select
"P.Hold On", then press AMS or YES.
4 Press MENU/NO.
To turn off the Peak Hold Function, select "P.Hold Off" in step 3
above.
z
You can use the remote to turn the Peak Hold
Z
Function on or off
Press P.HOLD to display "P.Hold On" or "P.Hold Off".
Recording for long times/Adjusting the recording level
REC LEVEL
17
GB

Publicité

Chapitres

Table des Matières
loading

Table des Matières