Sony MDS-JB940 Mode D'emploi page 4

Location and
Function of
Controls
This chapter describes the location and
function of the various buttons,
controls, and jacks on the deck and the
supplied remote. Further details are
provided on the pages indicated in the
parentheses.
It also describes the information that
appears in the display window.
4
GB
Front panel description
Front panel description
A ?/1 (power) switch/STANDBY indicator (14) (23)
Press to turn on the deck. When you turn on the deck,
the STANDBY indicator turns off. When you press the
switch again, the deck turns off and the indicator lights
up.
B Remote sensor (10)
Point the remote toward this sensor ( ) for remote
operations.
C FILTER button (43)
Press to select the type of the digital filter.
S.F EDIT button (37)
Press to change the recorded level after recording.
TIME button (18) (21)
Press to display the remaining time.
D MD insertion slot (14) (23)
Insert an MD as illustrated below.
With the labeled side up
With the arrow pointing toward the deck
E MD LP indicator (16) (23)
Lights when the deck is playing or recording to an MD
in LP2 or LP4 Stereo mode.
F REC MODE button (16)
Press to set the REC MODE to stereo, LP2, LP4 or
MONO.