Automatic Heat Up; Count Down Timer - Electrolux EHF6547FOK Notice D'utilisation

Masquer les pouces Voir aussi pour EHF6547FOK:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

22 www.electrolux.com
4.4 Activation and deactivation
of the outer rings
You can adjust the surface you cook to
the dimension of the cookware.
To activate the outer ring touch the sen-
sor field
on. For more outer rings touch the same
sensor field again. The subsequent indica-
tor comes on.
Do the procedure again to deactivate the
outer ring. The indicator goes out.

4.5 Automatic Heat Up

You can get a necessary heat setting in a
shorter time if you activate the Automatic
Heat Up function. This function sets the
highest heat setting for some time (see
the diagram), and then decreases to the
necessary heat setting.
To start the Automatic Heat Up function
for a cooking zone:
1.
Touch
play).
2.
Immediately touch the necessary heat
setting. After 3 seconds
in the display.
To stop the function change the heat set-
ting.
12
11
10
9
8
7
6
5
4
3
2
1
0
1
/
. The indicator comes
(
comes on in the dis-
2 3 4 5 6 7 8 9 10 11 12 13 14
4.6 Timer

Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for only
this one time.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
• To activate the Count Down Timer:
touch
00
of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with
the cooking zone starts to flash quickly.
The display shows the remaining time.
• To change the Count Down Timer:
set the cooking zone with
or
• To deactivate the timer: set the
cooking zone with
remaining time counts back to
The indicator of the cooking zone goes
out. To deactivate you can also touch
comes on
and
When the countdown comes to an end,
the sound operates and
The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
cator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch
When the indicator of the cooking zone
starts to flash slow, the time counts up.
of the timer to set the time (
99
-
minutes). When the indicator
. The indicator of
.
. Touch
at the same time.
00
again and again until the indi-
of the timer
. Touch
. The
00
.
flashes.
comes on.

Publicité

Table des Matières
loading

Table des Matières