Automatic Heat Up; Powerboost - Electrolux EIV744 Notice D'utilisation

adapt to the dimension of the bottom of
the cookware automatically.
You can cook with large cookware
placed on two cooking zones at the
same time. The cookware must cover the
centres of both zones but not go beyond
the area marking. If the cookware is
located between the two centres, Bridge
function will not be activated.
5.5 Bridge
The function operates when
the pot covers the centres of
the two zones.
This function connects two cooking
zones and they operate as one.
First set the heat setting for one of the
cooking zones.
To activate the function for left / right
cooking zones: touch
change the heat setting touch one of the
left / right control sensors.
To deactivate the function: touch
. The cooking zones operate
independently.

5.6 Automatic Heat Up

Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
setting.
To activate the function for a cooking
zone: touch
Immediately touch a desired heat setting.
After 3 seconds
To deactivate the function: change the
heat setting.

5.7 PowerBoost

This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
5.8 Timer
You can set one timer function for each
cooking zone separately. To set a timer
function for the zones on the left side use
the timer on the left, for the zones on the
right, the timer on the right.
Use this function to specify how long a
cooking zone should operate during a
/ . To set or
single cooking session.
First set the heat setting for the cooking
zone and then set the function.
/
To activate the function or change the
time: touch
until the indicator
lights up on the display. Then touch
or
The function starts automatically after 4
seconds.
To activate the function the
cooking zone must be cold.
( comes on).
comes on.
Refer to "Technical data"
chapter.
. comes on.
Count Down Timer
quickly again and again
of a given zone
to set the time (00 - 99 minutes).
comes on the display.
ENGLISH 11