Accessories; Technical Data - IKA HS 260 basic Mode D'emploi

3106600c_HSKS260_052006:HS-KS 260 b-c 13.04.10 14:32 Seite 34

Accessories

AS 260.1 Universal attachment
AS 260.2 Holding bracket adapter
AS 260.3 Dish attachment
AS 260.5 Separating funnel attachment
(HS/KS 260 control version only)
PC 5.1 Adapter IKA - Control
PC 1.5 Cable
PC 2.1 Cable
PC 1.2 Adapter

Technical data

Design voltage:
or
Design frequency:
Input power:
Speed range: HS
Speed range: KS
Perm. duration of operation: %
Perm. ambient temperature: °C
Perm. relative humidity:
Protection class acc. to DIN 40 050: IP 21
Protection class:
Overvoltage category:
Contamination level:
Operation at a terrestrial
altitude: m
Drive:
Protection at overloaded:
34
AK 2.1 Cable
AK 2.2 Cable
VAC 230±
10%
VAC 115±
10%
Hz 50/60
W 45
rpm 0 - 300
rpm 0 - 500
100
+5 to +50
% 80
I
II
2
max. 2000 above sea level
Speedcontrol asyn-
chronous motor
Temperature sensor
in motor winding
Fuses on apparatus plug: A
Shaking motion: mm
mm
Max. load: kg
Dimensions: (B x H x T) mm
Weight: kg
kg
HS/KS 260 basic
Speed setting:
Rotary knob on front side left
Speed display:
Max. speed
deviation from idle: %
Time setting:
Rotary knob on the front
side right
Time display:
Max. time
deviation from idle: %
HS/KS 260 control
Speed setting:
Rotary knob on the front
side left
Speed display:
Max. speed
deviation from idle: %
Time setting:
Rotary knob on the front
side right
Time display:
Max. time deviation from idle: %
Interface:
T1AL (Id-Nr. 13 637 00)
KS - Ø10 orbital
HS - 20 to and fro
7,5
360 x 97 x 420
8,1 (basic)
8,8 (control)
Analog (infinitely variable)
10 LED's with scale-in
30 rpm steps (HS) und 50
rpm steps (KS)
±10
three indexing positions /
key button 10 steps from
5 - 50 min in 5 min steps
10 LED's with scale in
5 min steps
±1
Digital
(1 step = 10 rpm)
LCD - Display
±1
Digital
(1 step = 1 min)
LCD - Display
max. 9h 59min
±1
RS 232 C / analog
HS/KS260 0305