Connecting To Networks And Usb Devices - Esoteric N-05XD Mode D'emploi

Connecting to networks and USB devices

H
ETHERNET port
Use a LAN cable to connect to a network .
Use a commercially-available LAN cable for connection.
I
USB drive port (USB DRIVE)
Connect USB flash drives that contain audio files, for example,
here .
o This port can only be used to play audio files contained on
the connected USB flash drive or other device .
o To play audio files on a USB flash drive or other device con-
nected to the USB drive port, set the input source to NET and
use an app for playback (page 14) .
J
USB port
Use this to input digital audio from a computer . Connect it to a
computer's USB port .
Use a commercially-available USB cable for connection.
o Before connecting, read pages 22 and 23 .
12
Computer
To Wi-Fi™ router
Make this connection
when using this unit
as a USB DAC .
Wall outlet
3
K
AC power inlet (~IN)
Connect the supplied power cord to this AC inlet .
After completing all other connections, plug the power plug
into a power outlet .
V
Use only a genuine ESOTERIC power cord. Use of
other power cords could result in fire or electric
shock.
V
Disconnect the power plug from the outlet if you
will not use the unit for a long time.
L
SOFTWARE maintenance port
This is used for maintenance . Do not connect anything to this
port unless instructed to do so by our service department .