Dentsply Sirona
Operating Instructions CEREC AF / AF Connect / AI / AI Connect / AI for Rear
66 37 487 D3652
D3652.201.01.19.02 10.2018
6.5.4
Switching the units off
NOTE
Proper shutdown procedure
The operating system must always be shut down properly to prevent
data loss.
1. Exit all programs.
2. Power down the operating system.
NOTE: Now you can also switch the milling unit off if necessary.
6.5.5
Tablet operating notes
If a tablet should have been part of the scope of supply, pay attention to
the information in the following sections:
● Samsung Galaxy Tab S [→ 46]
● Dell Venue 10 Pro 5055 [→ 47]
● Dell Venue 10 Pro 5056 [→ 50]
Since September 2018 / serial number 1183, the tablet no longer forms
part of the scope of supply.
6 Installation and startup
45