Dentsply Sirona CEREC AF Notice D'utilisation page 61

Dentsply Sirona
Operating Instructions CEREC AF / AF Connect / AI / AI Connect / AI for Rear
66 37 487 D3652
D3652.201.01.19.02 10.2018
Completing the scanning process
1. Start as indicated above, on the occlusal surface of the right
terminal tooth, and scan it occlusally.
Tilt the camera by 45° in a palatinal direction (oral) and guide it from
the distal to the mesial.
2. Tilt the camera another 45° in a palatinal direction (oral) and move it
in a distal direction.
3. Tilt the camera by 90° on to the occlusal surface and move it in a
mesial direction.
4. Tilt the camera in a 45° buccal direction and move it back towards
the distal.
5. Then tilt the camera a further 45° in a buccal direction to a total of
90° and move it in a mesial direction again.
7 Operation
59