Select Temperature - Maytag MD-24 Guide D'utilisation

Using the Controls
STEP 2
Select Dryness Level
To select the dryness level in the Normal/Auto Dry or
Wrinkle Control cycles, press the Dryness Level pad.
An indicator light will illuminate next to the desired
dryness level. Press the pad repeatedly to scroll
through the settings.
Loads of larger or bulkier size may require the More
Dry Setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
STEP 3

Select Temperature

To select the correct temperature, in the Normal/Auto
Dry, Wrinkle Release or Damp Dry cycles, press the
Temperature pad. An indicator light will illuminate
next to the desired temperature. Press the pad
repeatedly to scroll through the settings.
Use the chart below as a guide:
DRYER TEMPS
For sturdy cottons or those labeled
Regular
Tumble Dry.
Medium For permanent press, synthetics,
lightweight cottons or items labeled
Tumble Dry Medium.
For heat sensitive items labeled
Low
Tumble Dry Low or Tumble Dry
Warm.
LOAD TYPE
6