Clean The Lint Filter; Load The Dryer Properly - Maytag MD-24 Guide D'utilisation

Operating Instructions

Clean the Lint Filter

• After each load.
• To shorten drying time.
• To operate more energy efficiently.
Note
• Do not operate the dryer without the lint filter grid
in place.
• Do not operate the dryer without the filter in place.
To Clean the Filter
1. Remove the lint filter grid by depressing the latch
on the right end.
2. Swing the lint filter away from the grid.
3. Remove lint from the filter.
4. Swing the filter back so it lays flat against the grid.
5. Place the left end of the grid in the filter opening
and push the right side in until it latches.

Load the Dryer Properly

• Place only one washload in the dryer at a time.
• Mixed loads of heavy and lightweight clothes will dry
differently. Lightweight clothes will dry, while heavy
clothes may be damp.
• Add one or more similar items to the dryer when only
one or two articles need drying. This improves the
tumbling action and drying efficiency.
• Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.
3