Important Notes; Safety Information - CMi C-BS 250 Manuel D'utilisation

466957.book Seite 54 Donnerstag, 9. Dezember 2010 7:14 07

4. Important notes

The machine is to be operated only with suitable saw blades. To use the machine properly you must
GB
also observe the safety regulations, the assembly instructions and the operating instructions to be
found in this manual.
All persons who use and service the machine have to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident prevention regulations in force in your area.
The same applies for the general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the machine nor for any damage
resulting from such changes.
In spite of intended use, certain residual risk factors are not completely eliminated. Due to cons-
truction and set-up of the machine, following risks may appear:
• Damage to hearing if ear-muffs are not used as necessary.
• Harmful emissions of wood dust when used in closed rooms.
• Contact with the blade in the uncovered cutting zone.
• Injuries (cuts) when changing the blade.
• Injury from catapulted workpieces or parts of workpieces.
• Crushed fingers.
• Kickback.
• Tilting of the workpiece due to inadequate support.
• Touching the blade.
• Catapulting of pieces of timber and workpieces.
Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Important notes

Safety information

Caution!
Whenever you use electric tools it is imperative to take basic safety precautions in order
Attention!
to reduce the risk of fire, electric shock and personal injury. Essential safety precautions
include:
1. Keep your work area tidy!
– An untidy work area invites accidents.
2. Check the working conditions!
– Do not expose electric tools to rain.
– Never use electric tools in damp or wet locations.
– Make sure there is good lighting.
– Do not use electric tools near flammable liquids or gases.
3. Guard against electric shock!
– Avoid body contact with earthed components.
4. Keep other persons away!
54
466957 V_01/12/2010