Personalizing Drinks - Saeco GranAroma SM6585 Mode D'emploi

5 Press the start/stop
-
For specific drinks, the machine first dispenses milk and then coffee. For a number of other
drinks this is the other way around, the machine will first dispense coffee and then milk.
-
To stop dispensing milk before the machine has dispensed the preset amount, press the
start/stop button.
6 To stop dispensing the complete drink (milk and coffee) before the machine is finished, press and
hold the start/stop
7 Directly after dispensing the milk, the 'HygieSteam Shot' is performed. The machine forces steam
through the internal milk system to rinse it quickly.
Brewing coffee with pre-ground coffee
1 Tilt the lid and pour one measuring scoop of pre-ground coffee into the pre-ground coffee
compartment (Fig. 11).
2 After selecting a drink, use the up and down arrows to select pre-ground coffee (Fig. 12). Then press
the start/stop button.
Note: If you select pre-ground coffee, you cannot adjust the coffee strength and/or brew more than
one drink at the same time.
Dispensing hot water
1 Make sure that the internal cappuccinatore is properly attached to the machine (Fig. 13).
2 Place a cup under the spout
3 Tap the 'More drinks' icon (Fig. 3) and scroll down to select 'Hot Water'.
4 Use the up and down arrows to adjust the hot water quantity or temperature to your preference
(Fig. 14).
5 Press the start/stop
6 To stop dispensing hot water before machine is finished, press the start/stop stop

Personalizing drinks

The machine allows you to adjust the settings of a drink to your own preference and to store the
adjusted drink in a personal profile. The different profiles have different colors.
Brewing drinks with CoffeeMaestro function
Your machine offers the possibility to select taste profiles instead of adjusting all settings separately
with the CoffeeEqualizer function. You can choose between Delicato, Intenso and Forte. To select a
CoffeeMaestro taste profile:
1 Tap the drink icon of your choice (Fig. 2) or tap the 'More Drinks' icon to select a different drink (Fig.
3).
2 Tap the CoffeeMaestro icon repeatedly (Fig. 15).
3 Press OK to confirm your choice.
The main settings of the drink are now adjusted accordingly.
4 Press the start/stop
CoffeeEqualizer function
After selecting a drink, the CoffeeEqualizer function is activated automatically. You can use the up and
down arrows to adjust the following settings:
button.
button.
button.
button to start brewing the drink.
English
9
button again.