Brewing Drinks; Brewing Coffee With Beans - Saeco GranAroma SM6585 Mode D'emploi

English
8

Brewing drinks

General steps
1 Fill the water tank with tap water and fill the bean hopper with coffee beans.
2 Insert the small plug into the socket located on the back of the machine. Insert the mains plug into
the wall socket.
3 Press the on/off button to switch on the machine.
-
The machine starts heating up and performs the automatic rinsing cycle.
-
When all lights in the drink icons light up continuously, the machine is ready for use.
4 Place a cup under the coffee dispensing spout. Slide the coffee dispensing spout up or down to
adjust its height to the size of the cup or glass you are using (Fig. 1).

Brewing coffee with beans

1 To brew a coffee, tap the drink icon of your choice (Fig. 2) or tap the 'More Drinks' icon (Fig. 3).
-
You can now adjust the drink to your personal taste (Fig. 4). Use the up and down arrows (Fig. 5)
to adjust the coffee strength. Tap the OK icon if you want to adjust more settings (Fig. 6).
2 Press the start/stop
3 To stop dispensing coffee before the machine is finished, press the start/stop
To brew 2 coffees at the same time, tap the drink icon twice or select the 2x icon scrolling the
dedicated bar.
Do not use caramelized or flavored coffee beans.
Brewing milk-based drinks
1 Fill the water tank with tap water and fill the bean hopper with beans.
2 Unscrew the lid of the milk container and fill the milk container with milk (Fig. 7). Then place the
metal milk tube in the container.
Always use milk coming directly from the fridge for optimal results.
3 Connect the flexible milk tube to the cappuccinatore (Fig. 8).
4 Tap the milk-based drink icon of your choice (Fig. 9) or tap the 'More Drinks' icon to select a
different drink (Fig. 3).
-
You can now adjust the drink to your own preference (Fig. 10).
1 min.
button at any time to start brewing the selected drink.
5 sec. 30 sec.
button again.