Pioneer XDJ-R1 Mode D'emploi page 9

Making the wireless LAN connection
settings in the ENABLE mode
1 Press the [INFO(UTILITY)] button for over 1 second.
2 Turn the rotary selector, select [WLAN INFO], then
press the rotary selector.
3 Turn the rotary selector, select [SSID], then press the
rotary selector.
Make a note of the [SSID] for future reference.
! The first 9 characters of the [SSID] are displayed. Turn the rotary
selector to display the portion that is not initially displayed.
4 Press the [BACK(TOP)] button.
Press to return to the previous screen.
5 Turn the rotary selector, select [PASSWORD], then
press the rotary selector.
Make a note of the [PASSWORD] for future reference.
6 From the wireless LAN connection settings on the
mobile device, display the connectable [SSID]s.
! See your device's operating instructions for instructions on search-
ing for or displaying connectable [SSID]s.
7 On the mobile device, select the [SSID] checked in
step 3.
8 Input the password you made a note of in step 5.
! For safety, be sure to change the default password. We recommend
changing the password periodically.
Cautions concerning security when using
wireless LAN products
Wireless LAN connections offer the advantage that because the infor-
mation is exchanged between the computer, etc., and the wireless LAN
access point using radio waves rather than a LAN cable, LAN connec-
tions are possible as long as the devices are within the range of the radio
waves.
On the other hand, because the radio waves reach all places within their
range, even through such obstacles as walls, the problems below may
occur if the security settings have not been made.
! Exchanged information may be viewed surreptitiously
Third parties with malicious intents may deliberately intercept the
radio waves and surreptitiously view the exchanged information,
including ID numbers, passwords, credit card numbers and other
personal information or e-mail messages.
! Your network may be infiltrated without authorization
Third parties with malicious intents may access your personal or
company network without authorization and obtain personal or con-
fidential information (leakage of information), impersonate specific
persons and release false information (impersonation), rewrite inter-
cepted information and issue the rewritten information (falsification)
or plant computer viruses, etc., that damage your data or system
(vandalism).
Wireless LAN products normally have a security system. Using the
product with the security settings activated decreases the above
risks.
It is your responsibility to thoroughly understand the risks of using
wireless LAN products without security settings and to make the
security settings according to your personal judgment.
Playback
This section describes basic track selection operations and how to
switch the screen.
Playing media connected to or inserted in
this unit
1 Press the [STANDBY/ON] button.
The [STANDBY/ON] indicator lights green.
2 Load the medium in this unit.
CD: Insert the CD into the disc insertion slot.
USB: Insert the USB device into the USB device insertion slot.
3 Press the corresponding medium button ([CD] or
[USB]).
The tracks or folders are displayed on a list.
The medium whose contents are displayed on the main unit display can
be switched.
[CD] button: Displays the contents on the inserted disc.
[USB] button: Displays the contents on the connected USB device.
! If tracks are loaded from another medium, a warning message is
displayed. Check the message, then press the rotary selector. The
warning message turns off and the medium is switched.
! If the storage device (USB) contains rekordbox library information,
the rekordbox library is displayed.
! When a link is established with remotebox, the contents of the USB
device are displayed on the mobile device, not on this unit.
4 Turn the rotary selector.
Move the cursor and select the item.
! Press the rotary selector to move to a lower level in the folder. Press
the [BACK] button to return to the level above.
! When the [BACK] button is pressed for over 1 second or the medium
button for the medium being browsed is pressed, the display moves
to the topmost level.
5 Select the track and press the rotary selector.
When the track is loaded, the screen switches to the information display
mode.
The track is loaded, playback starts, and the corresponding medium
button flashes.
! When a track has been loaded while pausing, press the
[PLAY/PAUSEf] button to start playback.
! When auto cue is turned on, the disc pauses at the audio start posi-
tion. In this case, press the [PLAY/PAUSEf] to start playback.
For details on the auto cue function, see this product's operating
instructions.
 If the medium contains the rekordbox library
If the USB device connected to this unit contains the rekordbox library
information, the rekordbox library is displayed.
! Music files are displayed in the categories (album, artist, etc.) set
with rekordbox.
9
En