Atlantic MARADJA Série Notice D'utilisation Et D'installation page 26

However, if you have already modified your program, you must proceed as follows:
What you want to do
Enter the programming
sub-menu
Exit from sub-menu
Exit from menu
6.2 - Ventilation Functions
To prevent wasting energy the device must be correctly setup when ventilating rooms. Your device has a direct
access button to facilitate this procedure.
What you want to do
Activate the Ventilation
function
Deactivate the Ventilation
function
What you must do to achieve this
Press the key
Press the and keys to access the
«Programming» message
Press .
Press and until Monday appears.
Use the or keys to select
centralised programming.
Validate by pressing
Use the and keys to go to the
next day and proceed in the same way
for each day of the week.
Press the and keys until you
reach «Menu return» and click
Press the and keys until you reach
«Exit from menu».
Validate by pressing
What you need to do so
Before opening the window, press the
key.
Close the window, press the
key.
What happens
«Date – time» is displayed.
The «Programming» message is
displayed.
The message «Prog1» is displayed.
Monday is displayed and the current
program flashes.
The message «Centralised» flashes.
The message «Centralised» no longer
.
flashes.
Return to the main menu is obtained.
«Exit from menu» is displayed.
The initial screen, with current mode
.
and selected temperature, is displayed.
What will happen
The
the screen as well as the Freeze
Protection mode.
The
The current mode and the chosen
temperature are displayed
icon is displayed on
icon disappears.