Atlantic MARADJA Série Notice D'utilisation Et D'installation page 25

Before starting to define your programs, you must first set the date and time following the procedure given in
§ 6.1.1.1 and 6.1.1.2
What you want to do
Enter the programming
sub-menu
Enter a program
Assign the programs to
the days of the week
Exit from sub-menu
Exit from menu
6.1.2.2 - Program your radiator using an external programming function
By default, the program installed for every day of the week is the external program downloaded by the
centralised programming function. Consequently, if your radiator is connected to a centralised programming
system you have nothing to do other than select the Prog. mode.
What you must do to achieve this
Press the key
Press the and keys to access the
«Programming» message et
Press
Press the key for Comfort times
and key for the Eco times.
Use the and keys to go from one
time to another.
Press to validate.
Use the and keys to go to the
next program.
Use the and keys to access the
first day of the week.
Use the or key to select
Prog 1, Prog 2 or Prog 3.
Stop on the selected program and
validate by pressing
Use the and keys to go to the
next day: Tuesday, and so on up to the
end of the week.
Press the and keys until you
reach «Menu return» and click
Press the and keys until you
reach «Exit from menu».
Click .
What happens
«Date – time» is displayed.
The message «Programming» is
displayed.
The message «Prog1» is displayed.
Comfort segment =
Eco segment =
The information displayed no longer
flashes.
The message «Prog2» is displayed.
Proceed as for «Prog1».
The day and the message
«Centralised» are displayed.
The programs are scrolled and flash.
The selected program stops flashing.
.
Return to the main menu is obtained.
.
«Exit from menu» flashes.
The initial screen, with current mode
and selected temperature, is displayed.