Consumption Indication Fonction; Control Lock; Load Shedding - Atlantic MARADJA Série Notice D'utilisation Et D'installation

6.3 - Equilibrium Function
To immediately set the recommended settings use the Equilibrium function. It represents a balance between
your comfort and savings.
What you want to do
Activate the Equilibrium
function
6.4 - Consumption Indication Function
An electrical heating device's consumption depends, among other things, on the desired temperature.
Governmental authorities recommend setting the temperature at 19°C.
The "Eco Indicator" function enables you to establish your position in regard to this recommended temperature.
So, based on the desired temperature:
- If the black arrow on the screen is located in front of the red or dark orange pictogram, you could adopt a more
"eco citizen" behavior by significantly lowering the desired temperature.
- If the black arrow on the screen is located in front of the yellow pictogram, you could adopt a more "eco
citizen" behavior by slightly lowering the desired temperature.
- If the black arrow is located in front of the green arrow you are at the recommended temperature and you
already demonstrate "eco citizen" behavior.

6.5 - Control Lock

In order to prevent accidental changes to the controls, we suggest you lock them.
What you want to do
Lock access to the controls
Deactivate the lock

7 - Load Shedding

Choose a load shedding device with a pilot wire or carrier current to cut-off heating devices (based on your
contract with your electricity provider). Indeed, a power output load shedding device may damage the devices'
thermostat.
During these periods, your device displays «Load shedding.» It then returns to its initial operating mode.
What you need to do so
Press the key.
What you need to do so
Press and hold the
Press and hold the
What will happen
«Equilibrium» is displayed for a few
seconds on the screen.
What will happen
key.
The
key.
The
icon is displayed.
icon is no longer displayed.