Specific Safety Rules - Ryobi CJS-180L Manuel D'utilisation

GB
FR DE ES IT

SPECIFIC SAFETY RULES

Q
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting
a "live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
SAFETY RULES FOR LASER GUIDE
The laser guide radiation used in saw is Class 2M with
maximum <5mW and 650nm wavelengths. These lasers
do not normally present an optical hazard, although
staring at the beam may cause flash blindness.
WARNING:
DO NOT stare directly at the laser beam. A
hazard may exist if you deliberately stare into the
beam, please observe all safety rules as follows;
The laser shall be used and maintained in accordance
Q
with the manufacturer's instructions.
Never aim the beam at any person or an object other
Q
than the work piece.
The laser beam shall not be deliberately aimed at
Q
personnel and shall be prevented from being directed
towards the eye of a person for longer than 0.25s.
Always ensure the laser beam is aimed at a sturdy
Q
work piece without reflective surfaces. i.e. wood or
rough coated surfaces are acceptable. Bright shiny
reflective sheet steel or the like is not suitable for
laser use as the reflective surface could direct the
beam back at the operator.
Do not change the laser guide assembly with a
Q
different type. Repair must only be carried out by the
laser manufacturer or an authorised agent.
Save these instructions. Refer to them frequently
Q
and use them to instruct others who may use this
tool. If you loan someone this tool, loan them these
instructions also.
CAUTION:
Use of controls or adjustments or performance
of procedures other than those specified herein
may result in hazardous radiation exposure.
961075062-03(CJS-180L)_EU.indd Sec1:1 961075062-03(CJS-180L)_EU.indd Sec1:1
NL PT DK SE FI NO
English
LASER RADIATION
DO NOT STARE INTO THE BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 2M LASER PRODUCT
RU PL CZ HU RO LV
SPECIFICATIONS
Motor
Switch
No Load Speed
Cutting Angle
Maximum Cutting
Thickness(Wood )
Blade Stroke
Shank capacity
Orbital Motion
Laser Guide
MODEL BATTERY PACK
(not included)
BPP-1815
BPP-1815M
BPP-1817
BPP-1817M
BPL-1820
CJS-180L BPL-1815
BPP-1815
BPP-1815M
BPP-1817
BPP-1817M
DESCRIPTIONS
1. Lock-off button
2. Switch trigger
3. Blade storage
4. Orbital adjustment knob
5. T-shank saw blade
6. Toolless blade clamp
7. Hex key
8. Hex key storage area
9. Laser guide switch
10. Laser guide
11. Battery pack( not included)
12. Latches
13. Depress latches torelease Battery pack
14. Blade clamp lock
15. Base pivot screw
16. Edge guide screw
17. Base
18. Scale
19. Moves the laser beam in a rotational direction
20. Moves the laser beam laterally left to right
1
LT EE HR SI SK GR
18V
Variable Speed
-1
0-2,100 min
0º to 45º(Right)
40 mm
19 mm
6.35 mm
4 Settings
Class 2M,5mW max, 650nm
CHARGER
(not included)
BCL-1800
BCS618
BCL1418
BC-1815S
BC-1800
1/5/10 1:37:41 PM 1/5/10 1:37:41 PM
TR