Use - Beurer FC 40 Mode D'emploi

• For one day before and one day after use, avoid activities that cause you
to perspire, such as saunas, tanning beds and sun exposure.
• After use: Clean your face with water and protect it against sun exposure.
Note
The device can also be used twice a week for non­sensitive problem skin
(with a break of at least 48 hours between use).

6.4 Use

1. Turn the attachment to take it off the device
and remove the cover from the suction head.
2. Place a filter on the suction head and then
place the cover back over it. Make sure that
the filter remains dry.
3. Place the attachment you wish to use on the
suction head.
4. Press the ON/OFF button to now switch on
the device. The intensity and battery state
indicator begins to light up.
5. Select your desired intensity level using the
­/+ buttons. We recommend you start using
a low intensity level during the first few appli­
cations so that you get used to the device
gradually.
22