Product Features; Noise/Vibration Information; Technical Data; Declaration Of Conformity - Bosch GNA 2,0 Professional Notice Originale

12 | English

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 On/Off switch
2 Screwed cap for die
3 Locking screw for die
4 Die
5 Punch
6 Hollow screw for fastening of punch
The accessories illustrated or described are not
included as standard delivery.

Noise/Vibration Information

Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 82 dB(A); Sound
power level 93 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
Uncertainty K < 1.5 m/s
The vibration emission level given in this informa-
tion sheet has been measured in accordance with
a standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly in-
crease the exposure level over the total working
period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
1 609 929 M22 | (8.10.07)
2
= 11 m/s ,
h
2
.

Technical Data

Nibbler
Article number
Rated power input
Output power
Stroke rate at
no load n
0
Stroke speed under
load
Max. steel sheet
cutting capacity*
Cutting width
Smallest curve radius
Weight according to
EPTA-Procedure
01/2003
Protection class
2
* to 400 N/mm with reference to steel sheet
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual
machines may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
20.08.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
GNA 2,0
Professional
0 601 530 1..
W 500
W 270
spm 2400
spm 1500
mm 2.0
mm
mm
kg 2.0
Dr. Eckerhard Strötgen
Head of Product
Certification
Bosch Power Tools
6
3
/ II