Technical Specifications - Dörr FX-1520 DL Notice D'utilisation

06 | FIRST COMMISSIONING
06.1 CHARGING THE LI-ION BATTERY
Before fi rst use of the Flex Panel, please fully charge the Li-Ion battery (18) with the supplied
battery charger (12).
CAUTION
Only charge rechargeable Li-Ion batteries of the type NP-F550 with the supplied battery char-
ger! The charger is not suited to charge other battery types!
Insert the power cable (17) to the cable socket of battery charger (13) and connect with an
electrical outlet. The LED charging indicator (16) lights up green.
Place the Li-Ion battery (18) over the center of the charging slot (14) and pay attention to
correct polarity (markings +/- on the battery and in the charging slot). Slide the battery
fully forward into the battery contacts (15). If battery is inserted properly and the char-
ging process is started, the LED charging indicator (16) lights up red. When battery is fully
charged, the LED charging indicator (16) turns green. Slide the Li-Ion battery backwards
and remove it from the charging slot. Disconnect the battery charger from the electrical
outlet.
CAUTION
Never leave the battery charger unattended while charging the battery. After charging,
disconnect the charger from power supply.
NOTE
To avoid deep-discharge of the Li-Ion battery when Flex Panel is not in use for a longer
period, please charge Li-Ion battery up to approx. 60%.
Replacement battery from DÖRR optionally available from DÖRR in stores:
DÖRR Li-Ion battery (Replace-) NP-F550
Item-No. 980075
06.2 INSERTING THE LI-ION BATTERY INTO FLEX PANEL
CAUTION
Before inserting or removing the Li-Ion battery, make sure that Flex Panel is turned o (On/
O switch (5) = OFF).
Insert the Li-Ion battery (18) into the battery slot (8). Pay attention to correct polarity
(markings +/- on the battery and in the battery slot). Slide the battery fully forward into
the battery contacts (10) until the battery clicks into place.
To remove the Li-Ion battery, press the release button (9) and slide out the battery.
06.3 ALTERNATIVE POWER SUPPLY
Alternatively, the Flex Panel can be operated with a power supply DC 7-12V, 3A (optional),
which will be connected with the power supply socket(6). Note the instructions for use
and the safety hints of the manufacturer.
07 | OPERATION
To turn on the Flex Panel, slide the On/O switch (5) to the position ON.
Turn the brightness control (3) to dim the brightness continuously (to the left = darker/to
the right = lighter).
To turn o the Flex Panel, slide the On/O switch (5) to the position OFF.
CAUTION
After use please turn o the LED fl ex panel (On/O switch 5 = position OFF).
08 | MOUNTING
08.1 MOUNTING ON A CAMERA/CAMCORDER WITH FLASH HOT SHOE
For mounting on your camera or camcorder, slide ball head (20) with the universal fl ash
shoe (24) in the hot shoe mount of your camera or your camcorder. Turn down the locking
screw (25) to lock the ball head tight.
08.2 MOUNTING ON A TRIPOD
For mounting on a tripod, unscrew the universal fl ash shoe (24) from the ball head.
With the ¼ tripod socket (23) underneath the ball head, the Flex Panel can be mounted
onto a tripod.
For landscape format use the ¼" tripod socket below the Flex Panel (7a), for portrait for-
mat use the lateral ¼" tripod socket (7b).
09 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend
a soft, slightly damp microfi ber cloth to clean the outer parts of the device and the LED
surface. Turn o the device and remove the battery before cleaning. Store the device in
a dust-free, dry and cool place. This device is not a toy - keep it out of reach of children.
Keep away from pets.

10 | TECHNICAL SPECIFICATIONS

FLEX PANEL FX-1520 DL
Number of LEDs
Colour temperature
Power
Beam angle
Colour rendering index (CRI)
Illuminance
Operation via
Dimensions
Dimensions illuminated area
Transport dimensions including
battery
Weight including battery
BATTERY CHARGER
Input
Output
Dimensions
Weight
11 | SCOPE OF DELIVERY
1 Flex Panel FX-1520 DL
1 Battery (Replace-) NP-F550
1 Ball head with fl ash shoe
1 Battery charger with power cable
1 Safety hints
8
80 white
max. 5600 K
16 W
65°
95 R
a
0,5 m: 1660 Lux, 1,0 m: 406 Lux
(Replace-) NP-F550 Li-Ion Battery 7,4 V 2300 mAh
(Port for optional power supply DC 7-12 V, 3 A available)
approx. 215 x 215 x 40 mm
approx. 150 x 200 mm
approx. 110 x 215 x 60 mm
approx. 415 g
AC100-240 V 50/60 Hz 150 mA (max.)
DC 8,4 V/600 mA
approx. 85 x 46 x 40 mm
approx. 118 g