Cleaning And Storage; Technical Specifications - Dörr BVL-152 Notice D'utilisation

Press confirmation button (10) to enter the effect mode submenu. Choose your
desired effect with buttons (8):
Fade Strobe
Rainbow Fade Rainbow Strobe
Red Fade Red Strobe
Green Fade Green Strobe
Blue Fade Blue Strobe
Yellow Fade Yellow Strobe
Cyan Fade Cyan Strobe
Purple Fade Purple Strobe
White Fade White Strobe
Red/Green Fade Warm White Strobe
Red/Blue Fade Cold White Strobe
Green/Blue Fade BiColor Strobe
Warm White Fade
Cold White Fade
BiColor Fade
(9) to set the desired speed of the chosen effect. To turn off the
Use buttons
LED video light slide the On/Off button (3) to position OFF.
NOTE
During operation the housing and LED´s will warm up.
•
Turn off the device after usage with On/Off switch (3).
•
Let the device cool down completely, before placing it in the storage pouch.
•
06 | MOUNTING
06.1 MOUNTING ON A CAMERA/CAMCORDER WITH FLASH HOT SHOE
To mount the RGB light on a camera or camcorder, screw the universal ball head
(12) into the ¼" connection thread (1) of the RGB LED video light. Then slide the
flash hot shoe adapter (12a) into the hot shoe mount of your camera or camcorder.
Tighten the locking screw (12b) downwards.
06.2 MOUNTING ON A TRIPOD
Unscrew the flash hot shoe adapter (12a) from the ball head. You have now the
possibility to mount the RGB light on any tripod with ¼" screw thread.
06.3 MOUNTING/DETACHING DIFFUSER PLATE
The diffusor plate (11) softens the light and reduces harsh shadows. In order to
mount the diffusor plate (11) place it on the front side of the RGB light respecting
that the 3 holders (11a) match with the 3 housing notches (11b) correctly. Press
gently until holders (11a) snap into the notches (11b).
Losen the holders (11a) from the notches (11b). Pull off the diffusor plate (11).
Scene Pulse
Fire Light Rainbow Pulse
Party Light Red/Green Pulse
Police Car Red/Blue Pulse
TV Light Green/Blue Pulse
Lightening BiColor Pulse
Explosion
Fireworks

07 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recom-
mend a soft, slightly damp microfiber cloth to clean the outer parts of the device.
Before cleaning make sure to switch off the device and take off from power
supply! Store the device in a dust-free, dry and cool place.
This device is not a toy – keep it out of reach of children. Keep away from pets.

08 | TECHNICAL SPECIFICATIONS

Number of LEDs
LED power max.
Colour temperature
Illumination power approx.
Colour Rendering Index (CRI)
Power supply
Runtime full power
(with fully charged battery)
Charging current
Port
Dimensions approx.
Dimensions illuminated area
approx.
Weight approx.
09 | CONTENT
1x SLIM RGB LED video light BVL-152
1x Universal ball head
1x USB-C charging cable
1x Diffusor plate white
1x Storage pouch
1x Safety hints
09
BVL-152
152 LEDs
(40x 6500 K, 40x 3000 K, 72x RGB)
12 W
3000 – 6500 K (+/- 300 K)
1450 Lux/at 0,5 m
590 Lux/at 1 m
> 95 R
a
Built-in Li-Ion battery – 7,4 V 1400 mAh
1,5 h
5 V/2,4 A
USB-C
12,5 x 7,4 x 1,5 cm
11,5 x 6,5 cm
212 g