Cleaning And Storage; Technical Specifications; Remote Control - Dörr DLP-1000 BI-COLOR Notice D'utilisation

The following functions only for kit Item No. 373482:
08 | OPERATION WITH LITHIUM ION BATTERIES
08.1 CHARGING THE LI-ION BATTERIES
Before first operation with batteries, please fully charge the Li-Ion batteries
(15) with the supplied battery chargers (14).
CAUTION
Only charge rechargeable Li-Ion batteries of the type NP-F750 with the sup-
plied battery charger! The charger is not suited to charge other battery types!
Insert the power cable (14e) to the cable socket of battery charger (14d) and
connect with an electrical outlet. The LED charging indicator (14a) lights up green.
Place the Li-Ion battery (15) over the centre of the charging slot (14c) and pay
attention to the correct polarity (markings +/- on the battery and in the
charging slot). Slide the battery fully forward until it touches the battery contact
pins (14b). If battery is inserted properly and the charging process has started, the
LED charging indicator (14a) lights up red. When battery is fully charged, the LED
charging indicator (14a) turns green. Slide the Li-Ion battery backwards and remove
it from the charging slot. Disconnect the battery charger from the electrical outlet.
CAUTION
Never leave the battery charger unattended while charging the battery. After
charging, disconnect the charger from the power supply.
NOTE
To avoid deep-discharge of the Li-Ion batteries when DLP-1000 light is not in
use for a longer period, please charge Li-Ion batteries up to approx. 60%.
08.2 INSERTING THE LI-ION BATTERIES
CAUTION
Before inserting or removing the Li-Ion batteries, make sure that the LED light
is turned off (main switch (7) to position O = Off).
Insert the Li-Ion batteries (15) into the battery slots (5) with the battery contacts
(15a) facing to the battery contact pins (5a). Slide the battery fully forward until it
touches the battery contact pins (5a).
To remove the Li-Ion batteries, slide the batteries backwards and remove them out
of the battery slots.

09 | REMOTE CONTROL

Insert the 2 supplied AAA batteries according to the polarity markings (+/-) into
the battery compartment (13f). Press the On/Off button (13d).
Display (13a)
13.1
13.3
13.4
13.2
A B C
D E F
13.5
13.1) Battery capacity indicator
13.2) Group selection A-F
13.3) Channel Selection 1-50
13.4) Brightness 0-100%
13.5) Colour temperature 3200 - 5500K
To pair the LED light with the remote control, first select the group (A - F) at the
LED light. Then press the button for group selection (13e) at the remote control.
Use the control buttons +/- (13b) to select the same group as set for LED light. To
confirm, press the SET button (13c) at the remote control.
Use the control buttons +/- (13b) to make your settings and confirm them by
pressing the SET button (13c). Press the button for group selection (13e) twice to
switch to the channel selection 0-50.
After a few seconds without operation, the remote control will automatically switch
off. To activate the remote control again, press the On/Off button (13d).
NOTE
After use turn off the LED light at the main switch (7, position O = Off) and
disconnect from power source. Please remove batteries when the LED light is
not in use for a longer period.

10 | CLEANING AND STORAGE

Never use aggressive cleansing agents or benzine to clean the device. We recom-
mend a soft, slightly damp microfiber cloth to clean the outer parts of the device.
Turn off the device and disconnect from power source or remove batteries
before cleaning. Store the device in a dust-free, dry and cool place. This device is
not a toy - keep it out of reach of children. Keep away from pets.

11 | TECHNICAL SPECIFICATIONS

Number of LEDs
Illuminance
Colour temperature
Power
Colour rendering index (CRI)
Operating voltage
Power adapter
Dimensions illuminated area
Dimensions
Weight
LED Continuous Light DLP-1000 Bi-Color Kit / Item No. 373482
Charger for NP-F750
Battery
Remote control
Light stand max. height
09
576 Bi-Color
approx. 2500 Lux/1 m
3200 - 5500 K
40 W
> 90 R
a
DC 15 V 3 A
AC 100~240 V, 50/60 Hz DC 15 V 3 A
approx. 20 x 20 cm
approx. 28,5 x 32 x 6 cm
approx. 1450 g
AC 100-240 V, 50/60 Hz
Input
150 mA (max.)
Output DC 8,4 V/600 mA
Dimensions approx. 8,5 x 4,6 x 4 cm
approx. 118 g
Weight
(Replace-) Sony NP-F750 Li-Ion battery 7,2 V
4400 mAh ( 31,68 Wh)
Frequency 2,4 GHz
2 x AAA batteries (included)
Batteries
approx. 215 cm