Product Description - Dörr DLP-1000 BI-COLOR Notice D'utilisation

02 | SAFETY HINTS FOR RECHARGEABLE BATTERIES
Only use high-quality batteries of popular brands. When inserting the battery
please respect the correct polarity (+/-). Please remove battery when device is not
in use for a long period of time. Do not throw the batteries into fi re, do not short-
circuit and do not disassemble them. Never charge non-rechargeable batteries –
risk of explosion! Remove leaking batteries from the device immediately. Risk of
battery acid burn! Clean the contacts before inserting fresh batteries. In case of
contact with battery acid, rinse the aff ected area immediately with water and con-
tact a doctor. Batteries can be dangerous to life if swallowed. Keep batteries away
from small children and pets. Do not dispose of batteries in household waste (see
also capture "Disposal of Batteries/Accumulators").

03 | PRODUCT DESCRIPTION

Continuous LED light kit for brilliant photo and video recordings.
Long-life Bi-Colour LEDs
•
Colour temperature adjustable from 3200 - 5500 K
•
Brightness adjustable
•
04 | NOMENCLATURE
1 Barndoors
2 Magnetic holders
3 Locking screws
4 Swivel frame
5 Battery slot
5a) Battery contact pins
6 LCD display
7 Main switch
8 Socket for power adapter
9 Control dial/press button
10 Socket for light stand with spigot
10a) Locking screw
11 Diff usor plate white/orange
11a) Magnetic mounts
12 Power adapter
12a) Power cable socket
12b) Connection plug
12c) Screw lock
12d) Power cable
Only included in kit Item No. 373482:
13 Remote control
13a) Display
13b) Control buttons +/-
13c) SET button
13d) On/Off button
13e) Button for group/channel selection
13f) Battery compartment
14 Battery charger
14a) LED charging indicator
14b) Battery contact pins +/-
14c) Battery slot
14d) Socket for power cable
14e) Power cable
15 Li-Ion battery
15a) Battery contacts +/-
05 | FIRST COMMISSIONING
CAUTION
Before connecting or disconnecting cable connections, make sure that the
main switch (7) is on position O = Off.
Insert the connection plug (12b) into the socket (8) at the LED light. Pay attention to
the pins and holes. Screw tight the screw lock (12c). To disconnect the cable con-
nection, make sure to open the screw lock (12c) fi rst! Plug the power cable (12d)
into the power cable socket (12a) and connect the power supply to a socket outlet.
Switch on the LED light at the main switch (7): position I = On.
CAUTION
After each use please turn off the LED light (main switch 7 = position O = Off).
06 | LED DISPLAY/SETTINGS
LCD Display (6)
6a
6c
6d
6a) Brightness 0 - 100 %
6b) Group selection A - F (for operation with remote control)
6c) Channel selection 1 - 50
6d) Battery capacity indicator
6e) Colour temperature 3200 - 5500 K
Turn the control dial (9) to select the desired brightness (6a) from 0 - 100%. Press
the control dial (9) to confi rm your selection. Turn the control dial (9) again to enter
selection for colour temperature (6e) (display fl ashes). Turn the control dial (9) to
select the desired colour temperature from 3200 - 5500K. Press the control dial
(9) to confi rm your selection. Press and hold the control dial (9) to enter the channel
selection 1 - 50 (6c) or the group selection A - F (6b).
After a few seconds without operation, the display illumination will automatically
switch off . Once you make a new adjustment, the display illumination will light up
again.
07 | ATTACHING/CHANGING THE DIFFUSOR PLATES
The magnetic mounts (11a) at the diff usor plate and the magnetic holders (2) allow
fast and easy attachment/exchange of the diff usor plates.
White diff usor plate provides soft light, reduces harsh shadows
Orange diff usor plate provides warm light
08
6b
6e