Safety Hints; Product Description - Dörr F X-3040 DL Mode D'emploi

GB INSTRUCTION MANUAL
LED Flex Panel
FX-3040 DL / FX-4555 DL Daylight
LED Light Panel
THANK YOU for choosing this DÖRR quality product.
Please read the instruction manual and safety hints carefully before fi rst use. Keep this
instruction manual together with the device for future use. If other people use this device,
make this instruction manual available. This instruction manual is part of the device and
must be supplied with the device in case of sale.
DÖRR is not liable for damages caused by improper use or the failure to observe the
instruction manual and safety hints.
01 |

SAFETY HINTS

Only for the illumination for photographic purposes. Not suited for permanent room
•
lightning.
Only operate with the supplied power supply and the original cables. Do not use an
•
extension cord. Alternatively, the light panel can be operated with a suitable V-Mount
Li-Ion battery (optional).
Ensure sufficient ventilation during operation. After use, please switch the device off.
•
Make sure to turn off the device at main switch before disconnecting from power.
•
LED Bulbs cannot be replaced.
•
Protect the device from rain, moisture, direct sunlight and extreme temperatures.
•
Do not operate or touch the device with wet hands.
•
Do not apply pressure to the light panel and do not place heavy objects on it.
•
Protect the LED surface from sharp objects. Do not use the light panel if it is damaged.
•
In this case a qualified electrician should inspect the device before you use it again.
Do not attempt to repair the device by yourself. Risk of electric shock! When service or
•
repair is required, contact qualified service personnel.
Do not use the device nearby mobile phones and devices that generate strong electro-
•
magnetic fields (e.g. electric engines).
People with physical or cognitive disabilities should use the device with supervision.
•
People with cardiac pacemakers, defibrillators or any other electrical implants should
•
maintain a minimum distance of 15 to 20 cm, as the device generates magnetic fields.
This device is not a toy. To prevent accidents and suffocation keep the device, the
•
accessories and the packing materials away from children and pets.
Protect the device against dirt. Never use aggressive cleansing agents or benzine to
•
clean the device. We recommend a soft, slightly damp microfiber cloth to clean the
outer parts of the device. Make sure to take off the device from power before cleaning!
Store the device in a dust-free, dry and cool place.
•
If the device is defective or without any further use, dispose of the device according to
•
the Waste Electrical and Electronic Equipment Directive WEEE. For further information,
please contact your local authorities.
02 |

PRODUCT DESCRIPTION

The DÖRR LED FX Flex Panels are equipped with the latest LED technology and are fully
fl exible in their application. The LED Flex Panels ensure a bright illumination even in hard
to reach areas or in the smallest spaces. With a height of only 10mm, they can be folded or
rolled up and are easy to transport. Well suited for portrait, product and video shootings.
03 | FEATURES
Colour temperature 5600 K (daylight)
•
Fully flexible and ultra-flat
•
Environmentally friendly, long-lasting LEDs
•
Low energy consumption
•
Brightness variably adjustable with dimmer
•
Operation with supplied power supply or V-mount Li-Ion battery (optionally from DÖRR)
•
7