Technical Specifications - Dörr SVL-180 PB PRO Notice D'utilisation

07.2 Mounting/unmounting the diffusor plate
The white diffuser plate (10) provides soft light and reduces harsh shadows. Slide the diffusor plate (10) from above until it is centred
on the front panel of the video light. The holders of the diffusor plate (10a) must not cover the control buttons (03,04,05).
Push the diffuser plate (10) upwards to remove it from LED front panel again.
07.3 Mounting/unmounting the honeycomb
The honeycomb (11) directs the light and reduces stray light, while contrast and brilliance are intensified. The illumination becomes
harder. The white diffuser plate (10) must be removed before the honeycomb (11) is installed. Slide the honeycomb (11) from above
onto the video light. Slide it back down to remove it.
08 | CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft, slightly damp microfiber cloth to clean
the outer parts of the device. Before cleaning make sure to switch off the device and take off from USB power supply! Store the
device in a dust-free, dry and cool place. This device is not a toy - keep it out of reach of children. Keep away from pets.

09 | TECHNICAL SPECIFICATIONS

Number of LEDs
LED Power max.
Colour temperature
Illumination power approx.
Dimmer
Colour Rendering Index (CRI)
Power supply
Runtime at full power approx.
(with fully charged battery)
Charging current
Port
Output power
Dimensions approx.
Weight approx.
Dörr GmbH reserves the right to make technical changes without notice.
10 | CONTENT
1x SLIM LED Video Light SVL-180 PB PRO
1x Universal flash hot shoe
1x USB-C charging cable
1x Mini USB charging adapter
11
180
12 W
3200-5600 K (± 300 K)
1000 Lux/1m
5 – 100%
> 96 Ra
3.85 V, 4040 mAh
Built-in Lithium Polymer battery
1,5 hours
5V 1A / 5V 2A
USB-C & Micro USB
5V 2A via USB-A
15 x 8 x 1 cm
190 g
1x Diffusor plate white
1x Honeycomb
1x Storage pouch
1x Safety hints
doerr-foto.de