05 | OPERATION
Press On/Off/Menu button (03) for about 3 seconds in order to turn on the LED video light.
Press On/Off/Menu button (03) shortly to switch from brightness
selected menu point in the display (02):
The button + (04) increases the brightness and the colour temperature.
The button – (05) decreases the brightness and the colour temperature.
Brightness is adjustable in 5% steps, while colour temperature is adjusted in 100° Kelvin steps.
During operation, the display (02) shows the remaining battery power in h (hours) or m (minutes).
The battery symbol shows the battery capacity graphically.
Press On/Off/Menu button (03) for about 3 seconds in order to turn off the video light.
CAUTION:
·
During operation, the housing and LEDs will warm up.
·
Turn off the device after usage by using On/Off/Menu button (03).
·
Let the device cool down completely, before placing it in the storage pouch.
06 | POWERBANK FUNCTION
Plug the Mini USB charging adapter for external devices (13) into the Mini USB output socket "5V out" (06) to use the powerbank
function. Now you are able to charge all your devices over USB (we recommend using the original USB cable of the respective
devices/manufacturers).
NOTE:
✓
You may use the powerbank function without turning on the video light. Just plug in any USB device – no further
action necessary
✓
It is possible to use video light at 100% power and charge an external device at the same time. This drains the battery
empty more quickly.
07 | MOUNTING
07.1 Mounting on a camera/camcorder with flash hot shoe
Screw the universal flash hot shoe (14) into the ¼" connection thread (01) of the video light. Slide the universal flash hot shoe (14) into
the hot shoe mount of your camera or your camcorder. Tighten the locking screw (14a).
10
to colour temperature
and back. The arrow
shows the
doerr-foto.de