Operating Elements And Connections - Monacor TVCCD-375COL Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

All operating elements and connections can be found on the fold-
out page 3.

1 Operating Elements and Connections

1
Housing base
2
Housing ring
3
Dome with cover
4 – 6 Camera bracket, adjustable in three axes:
– for tilting the camera upwards or downwards (4)
– for panning the camera to the left or right (5)
– for turning the camera (6)
7
Adjusting ring for the focal length
8
Adjusting ring for the picture sharpness
9
Video output (BNC)
10
Connection for the 12 VDC power supply (inside contact = posi-
tive pole) via a low voltage plug with the dimensions 5.5 / 2.1 mm
(outside / inside diameter)
11
Buttons LEFT
12
Button SET
13
Buttons UP
2 Important Notes
The camera corresponds to all required directives of the EU and is
therefore marked with
G
The camera is suitable for indoor applications only. Protect it against
humidity and heat (admissible ambient temperature range 0 °C to
40 °C).
G
Do not touch the lens with your fingers, for cleaning it only use spe-
cial detergents for optical lenses. For cleaning the housing only use
a dry, soft cloth, never use water or chemicals.
G
No guarantee claims for the camera and no liability for any resulting
personal damage or material damage will be accepted if the camera
and RIGHT
for calling and exiting the menu pages
and DOWN
.
for changing the menu settings
for selecting the menu items
GB
15

Publicité

Table des Matières
loading

Table des Matières