Télécharger Imprimer la page

Adjust The Doors - GE GTH21 Série Manuel D'utilisation Et D'installation

Publicité

Les langues disponibles

Les langues disponibles

REHANG THE REFRIGERATOR DOOR
8
Lower the refrigerator door onto the bottom
hinge pin.
Plastic
Washer
Screw the two screws into the center hinge location on
the left side with a 5/16 socket and ratchet.
Straighten the door and place the center hinge pin into
the opening on top of the door. Remember to include
the washer.
Move the door into place, so you can align the center
hinge bracket over the center hinge holes on the left
side. Insert and tighten the two screws with a 5/16
socket and ratchet.
NOTE: Ensure the washer is in place on top of the hinge
pin.
Plastic Washer
Hinge Pin
Center Hinge
Bracket
Refrigerator Door
REHANG THE FREEZER DOOR
9
Lower the freezer door onto the center hinge pin.
Be sure the washer is in place.
Plastic
Washer
Lift the top hinge so the pin fits into the door socket.
Support the door on the handle side and make sure the
door is straight and the gap between the doors is even
across the front. While holding the door in place, tighten
the top hinge screws.
Installation Instructions
Center Hinge Pin
25

ADJUST THE DOORS

10
(IF NEEDED)
If the freezer door is too high:
Remove the hinge
cover on top of the
freezer door and
loosen the four
screws with a 5/16
socket and ratchet.
Replace the hinge
cover.
If both doors are too high:
1. Remove
the hinge
Loosen screws. 5/16
cover on
top of the
freezer door
and loosen
the four
screws with
a 5/16
socket and
ratchet.
2. Loosen the
two center
hinge screws with a 5/16 socket and ratchet.
3. Slide the center hinge to the left to lower
the doors.
4. Fully tighten all screws and replace top hinge cover.
1. Remove the
hinge cover
Loosen screws. 5/16
on top of
the freezer
door and
loosen the
four screws
with a 5/16
socket and
ratchet.
2. Loosen the
two center
hinge screws
with a 5/16 socket and ratchet.
3. Slide the center hinge to the right to raise
the doors.
4. Fully tighten all screws and replace
top hinge cover.
NOTE: Save the door spacer.
Doors may settle with use.
Loosen screws. 5/16
5/16
Loosen
screws and
slide left to
lower doors.
5/16
Loosen
screws and
slide right
to raise
doors.
Door Spacer

Publicité

loading