Table des Matières
Publicité
42
9000 h
1
Supplier's Declaration of Conformity/Incorporation
WhisperPower Genverter W-GV4, no. 41012020
Issuer's name:
WhisperPower BV
Issuer's address: Kelvinlaan 82, NL-9207 JB Drachten
Object of the declaration:
The object of the declaration described above is in conformity with the requirements of the following Directives and standards, as
applicable:
Document
2004/108/EC
EN 61000-3-2:2014
EN61000-6-1: 2007
EN 61000-6-2: 2007
EN 61000-6-3: 2007+A1:2011
2006/95/EC
EN 60950:2000
2004/26/EC
2006/42/EC
EN 842:1996+A1:2008
ISO 12100:2010
The machinery is incomplete and must not be put into service until the machinery into which it is to be incorporated or the vessel into
which it is to be installed, has been declared in conformity with the provisions of the Directive.
We undertake to transmit, in response to a reasoned request by the appropriate national authorities, relevant information on the partly
completed machinery identified above.
Signed for and on behalf of:
WhisperPower BV
W-GV4 Scalino outdoor — Septembre 2017— FR WMS
Inspected by :
Prüfer :
Contrôleur :
In accordance with EN ISO 17050-1:2004
Title
Electromagnetic Compatibility Directive
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions
(equipment input current ≤ 16 A per phase)
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential,
commercial and light-industrial environments
Electromagnetic compatibility (EMC) -- Part 6-2: Generic standards - Immunity for industrial
environments
Electromagnetic compatibility (EMC) -- Part 6-3: Generic standards - Emission standard for
residential, commercial and light-industrial environments
Low Voltage Directive
Safety of information technology equipment
Non-Road Mobile Machinery Exhaust Emissions Directive
Machinery Directive
Safety of machinery - Visual danger signals - General requirements, design and testing
Safety of machinery - General principles for design - Risk assessment and risk reduction
*) Seal, stamp & full address of responsible WhisperPower
Date :
Service Centre (only applicable to items marked !)
Datum :
*) Stempel bzw. volle Adresse der Whisperpower
Servicefirma (nur für mit ! markierten Servicearbeiten)
*) Cachet et adresse complète du centre de services
WhisperPower (seulement pour les travaux marqués !).
CARNET DE MAINTENANCE
29
Publicité
Table des Matières
