Setting The Channel - Auriol Z31915 Instructions D'utilisation Et Consignes De Sécurité

If you want your weather station to announce the absolute air pressure, proceed
like this:
Press and hold the HISTORY ABS / REL button for approx. 3 seconds. After-
wards press the + or – button, to change to the absolute air pressure. Confirm
by pressing the HISTORY ABS / REL button.

Setting the channel

The weather station receives the outdoor sensor signal automatically after you have
made all the settings. The symbol for humidity (outdoor)
ture flashes during this time.
25
Note: In the event of interference from nearby equipment transmitting radio
signals, please select a different channel for the outdoor sensor by pressing the
CH button on the weather station or the channel selector switch
37
outdoor sensor. The relevant data is shown in the LC display.
- 1: Outdoor sensor channel 1
- 2: Outdoor sensor channel 2
- 3: Outdoor sensor channel 3
- : automatic channel change
30 GB/IE
and outdoor tempera-
22
on the
44