Elem Garden Technic THE500SP Traduction Des Instructions D'origine page 34

Troubleshooting
The table below contains a list of fault symptoms and explains what you can do to remedy the problem
if your equipment fails to work properly. If the problem still persists after working through the list,
please contact your nearest service workshop.
Fault
Machine does not start
Machine works with
interruptions
Poor cutting quality
Motor is running but the
gears are not engaging
You can request the instruction manual in PDF format by email:
Possible cause
• Supply voltage not on
• On/Off switch faulty
• Worn carbon brushes
• Motor faulty
• Power cable damaged
• Power cable damaged
• Internal connections are loose
• On/Off switch faulty
• Blades are blunt.
• The power unit is jammed by a thick
branch or other objects.
Made in China
Remedy
• Check the socket or the electricity
supply; if required, arrange repair
by an authorised electrician.
• Contact the service centre
• Contact the service centre
• Contact the service centre
• Check the extension lead and
have it replaced, if required.
• Check the extension lead and
have it replaced, if required.
• Contact the service centre
• Contact the service centre
• Have the blades sharpened or
the knife bar replaced.
• Turn the hedge trimmer off
immediately, disconnect the
electricity supply and remove the
blockage
info@eco-repa.com
2017
34