Power Supply; Scope Of Delivery - Elem Garden Technic THE500SP Traduction Des Instructions D'origine

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Items supplied
1. Back handle
2. Trigger
3. Safety switch
4. Flap
5. Quick acting lock
6. Telescopic tube
7. Cutting blade
8. Protective cover for cutting blade
9. Motor
10. Push button for angle adjustment of cutting
blade
11. Quick acting lock
12. Mains cable
13. Cable hook
Technical data
Voltage
Power consumption
Cutting length
Cutter rail length
Tooth spacing
Cuts/min
Weight
Telescope length max. 254.5 cm
Acoustic pressure level
L
83.28 dB(A)
PA
Acoustic power level
L
91.28 dB(A)
WA
Sound power level dB(A) L
Guaranteed: 102 dB(A)
The sound power pressure
may exceed 85 dB(A), in this
case individual hearing
protection must be worn.
Weighted root mean square acceleration
according to relevant standard. :
2
A
= 4.885m/s
,k=1.5m/s
h
The declared vibration total value
has been measured in accordance with a
standard test method and may be used for
comparing one tool with another that the
declared vibration total value may also be
used in a preliminary assessment of
exposure.
230-240V ~ 50Hz
500 W
450 mm
510 mm
18 mm
-1
1600 min
3.4 kg
K = 3 dB(A)
K = 3 dB(A)
WA
ATTENTION !
2
A warning that the vibration
emission during actual use of the power
tool can differ from the declared total value
depending on the ways in which the tool is
used and of the need to identify safety
measures to protect the operator that are
based on an estimation of exposure in the
actual conditions of use (taking account of
all parts of the operating cycle such as the
times when the tool is switched off and
when it is running idle in addition to the
trigger time).
Reduce noise generation and vibration to a
minimum!
• Use only equipment that is in perfect
condition.
• Maintain and clean the equipment regularly.
• Adopt your way of working to the equipment.
• Do not overload the equipment.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves.

Power supply

The hedge trimmer is designed for use only
with single-phase alternating current from a
230-240V~ 50Hz AC supply. It is totally
insulated, enabling it to be connected also to
socket-outlets without a PE conductor.
Before you use the hedge trimmer for the first
time, check that your mains voltage is the
same as the operating voltage specified on the
machine's rating plate.

Scope of delivery

• Open the packaging and take out the
equipment with care.
• Remove the packaging material and any
packaging and/or transportation braces (if
available).
• Check to see if all items are present.
• Inspect the equipment and accessories for
transport damage. In case of complaints the
supplier is to be informed immediately.
Complaints received at a later date will not be
acknow ledged.
• If possible, keep the packaging until the end
of the guarantee period.
• Read the operating instructions to make
yourself familiar with the device prior to using
it.
• After that, please dispose of it in an
environmentally friendly way.
30

Publicité

Table des Matières
loading

Table des Matières