General Information; Warranty; Using And Keeping Up The Owner'smanual; Definitions - Tecomec Sharp Master Manuel D'utilisation

c) Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the power
tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power
tool accidentally.
d) Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power tools
are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of
the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Warning!
Never stop the grinding wheel with your hands, even
after the motor has been switched off.

2. GENERAL INFORMATION

The manufacturer is not liable for damages in the following
cases:
- failed observance of the instructions given herein;
- use of the appliance other than that described in the
"INTENDED USE" section;
- failed use in compliance with current standards on Health
& Safety at the workplace;
- Incorrect installation;
- lack of scheduled maintenance;
- modifications or jobs that are not authorized by the
manufacturer;
- use of non-original or inadequate spare parts;
- repairs that are not carried out by a specialist.
8
EN

3. WARRANTY

The warranty validity is that acknowledged in the coun-
try of sale. Claims under warranty will only be accepted
if they are backed-up by the copy of the purchase
document (bill or receipt) and product packaging (if
possible intact).
The guarantee becomes void if:
a) the appliance has been tampered with;
b) the appliance has not been used according to this manual;
c) non-original parts, appliances or grinding wheels have
been fitted on the grinder or other parts that are not
authorized by the manufacturer;
d) the appliance has been powered at a voltage or frequency
different from that written in the rating nameplate.
The warranty does not cover:
any mechanisms or parts affected by wear (such as the
abrasive disk/grinding wheel, the motor carbon brushes,
vice, electrical switches and adjustment devices/knobs).
4. USING AND KEEPING UP THE OWNER'S
MANUAL
The characteristics and the information given in this manual
are merely indicative. The manufacturer reserves the right to
add any modifications to the grinder considered necessary
at any time.
It is forbidden to reproduce any part of this document without
authorization on behalf of the manufacturer.
The owner's manual is integral part of the appliance and
must be kept in a safe place so that it can be consulted
whenever need be.
If you should loose your manual or it should deteriorate, you
can request your dealer or an authorized service centre for
another copy.
The manual shall accompany the appliance at all times,
especially if it is sold on at a later date.

5. DEFINITIONS

Skilled technician: a person who is generally employed
by the service centre and who is trained to carry out ex-
traordinary maintenance jobs and repairs on the appliance.

6. SYMBOLS

This symbol points out the possibility of
serious personal injuries if the provisions and
instructions are not complied with.
This symbol points out that the user must wear
protection goggles when he uses the appliance.
This symbol points out that the user must wear
protective gloves when he uses the appliance.
This symbol points out the correct running
direction of the appliance (grinding wheel).
Read the instructions before using the machine
This symbol (on the rating nameplate) points
out that the product must not be disposed of
with normal household garbage. Contact an
authorized shop or your dealer for disposal
instructions.