IWC Schaffhausen AQUATIMER DEEP THREE Mode D'emploi page 28

— 2 8 —
Important: Although the watch is water­resistant in positions 0, 1 and 2, the crown
should always be screwed in again for normal use (position X).
r e A D i n g t h e t i m e i n t h e D A r k
The dial, the hour and minute hands, the marking on the internal rotating bezel, as
well as the dive depth scale of your watch have luminescent elements that allow you
to read the time effortlessly even in total darkness. The two luminescent elements at
12 o'clock serve as a reference point.
m A r k i n g t h e s t A r t O F A D i v e
The triangle on the internal rotating bezel can be aligned with the minute hand by turning
the external rotating bezel. The desired point in time (for example the time of entering the
water at the start of the dive) can be set in this way. You can read off the elapsed time
(for example the duration of the dive) on the internal rotating bezel. For safety reasons,
the internal rotating bezel can only be rotated in an anticlockwise direction. The rotating
bezel is indexed audibly and perceptibly in one­minute steps, and it is also legible in the
dark thanks to the luminescent markings.
A q u A t i m e r D e e p t h r e e